Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft


Wolfwhoop - Black pcb board prevent light-leaking, help to restore true color. Adjustable power 25mw/50mW/200mW, Long transmission range and less blink. Compatible with more types of RX. Plug and play, ready to fly, perfect for DIY. Adjustable power 25mw/50mW/200mW, Long transmission range and less blink. Specification: output power:0/25mw/50mw/200mW adjustable Set output power on 0, to avoid frequency interference Input power: 3.

2-5. 5v current consumption: 250ma-510ma25mw 270ma-640ma50mw 330ma-740ma200mw camera resolution: 600tvl video system:ntsc mini illumination: 1 lux Field of view: 120°FOV 150°DFOV Antenna dimensions: 22mm X 29mm diameter Antenna: cloverleaf antenna Frequency: 5. 8ghz 5 bands 40 channels, with raceband: 5658-5917 MHZ Size: 19.

Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft - 50*14. 00mml*w weight: 5g Micro size, light weight. Plug and play, ready to fly, perfect for DIY. High image resolution, good image contour and perfect low illumination. Features: Micro size, light weight. High image resolution, good image contour and perfect low illumination.

More information about Wolfwhoop

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera


Crazepony - Just remove the front, and reassemble. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation.

Just remove the front, press them into the mount, and 2 side Flight Controller Screws, and reassemble. Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv Camera MountWhite1 * FPV Camera MountOrange This is a camera/vtx mount for the blade inductrix.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera - Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1.

8 lense on these cameras.

More information about Crazepony


Similar products



Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone


Sinopine WT05 - Micro size and light weight only 3. 4g specification: Frequency:5. 8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power:25mW Input voltage: 3. 3v-5. 5v current consumption: 280matyp camera resolution: 600tvl field of view: 120° Video Format:NTSC Antenna: Dipole Brass Antenna Size: 15X 12.

5mmlx w weight: 3. 4g package included: 1 x wt05 aio fpv camera with cable 1 X User Manual 1 X Cable This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone - 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation. Easy installation for racing drone, Only 3. 4g. Just remove the front, and reassemble. Power by 1S lipo battery. Button contro l instead of switches to change channels.

More information about Sinopine WT05


Similar products



Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter


Wolfwhoop WR832 - Keep real, keep factory direct. Specification: power supply: DC 12V Working Frequency: 5. 8ghz sensitivity: >90 dbm type standard: ntsc/pal consumption current: 200ma, max receiver connector: RP SMA female Antenna connector: RP SMA male Available Channel: 40CH Antenna Gain: 2dbi Audio Carrier: 6. 5mhz audio output Level: 1.

0 vp-p typ 10 k ohm antenna impedance: 50 ohm antenna input impedance: 50 Ohm TYP Video impedance: 75 Ohm Video Format : NTSC/PAL Video Output Level: 1. 0 vp-p typ 75 ohm dimension: 80x65x15mm Weight: 85g Dimension LXWXH: 3. 15x2. 56x059 inches package: 1 x WR832 5. 8ghz 40ch fpv receiver 1 x antenna 1 x power cable 1 x av cable 1 x User manual Notice: Please get a 12V lipo battery for the receiver.

Wolfwhoop WR832 5.8GHz 40CH Wireless FPV Receiver for Racing Drone and Multicopter - Easy installation for racing drone, Only 3. 4g. Please feel free to contact us if you have new ideas for fpv products. The aio camera combo is perfect for ultra micro drone. All in one vtx + camera + antenna, plug and play, ready to fly. Long range more than 2km range in the open area - Plug and play. 40 channels: 5 bands and all frequencies compatible, E, b, Cover A, F, r bands.

More information about Wolfwhoop WR832


Similar products



FPV 5.8GHz Receiver, 150CH UVC Video Downlink OTG Receiver ONLY for OTG and UVC Android Mobile Black


Otryad - For sony: z1, sgp321, c3, z3, Z2, etc.4. This receiver only suits for computer of windows version and Android phone that support UVC and ensure your phone can work with OTG connector. One side is special for mobile, please try to plug them in reverse. This is the newest and best version otg fpv receiver, snow screen 0

1s Delay. Operation Instructions: 1. If it doesn't work, but in different function. For xiaomi: for xiaomi 3, for xiaomi5, for xiaomi red note3, for xiaomi red note, for xiaomi 4, for XIAOMI pad, For XIAOMI 4C, etc. Note 2. 3. Please connect them correctly. 5. App download: https://fir. Im/pocketfpv ;if there is any problem in operation, please contact us at first.

FPV 5.8GHz Receiver, 150CH UVC Video Downlink OTG Receiver ONLY for OTG and UVC Android Mobile Black - Button contro l instead of switches to change channels. Power off memory: Replay the very last frequency band and channel. All in one vtx + camera + antenna, plug and play, ready to fly. 40 channels: 5 bands and all frequencies compatible, b, F, Cover A, E, r bands. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc.

More information about Otryad


Similar products



Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector


Crazepony - We increase the channel to 150CH. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix JST-PH 2. 0 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 54mm * 12. 5mm * 6mmWeight: 6. 3g/per unitcapacity: 230mah in standard voltage, 250mAh in high voltageThe connector plug: JST-PH 2.

0 aka high current ultra micro, mcpxthis battery is lighter than the usual 230mah battery, Powerwhoop, and can be charged to either standard voltage 4.2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation. Easy installation for racing drone, Only 3.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector - 4g. The aio camera combo is perfect for ultra micro drone. All in one vtx + camera + antenna, plug and play, ready to fly. The connector plug: jst-ph2. 0 aka high current ultra micro, Powerwhoop, mCPX. This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny whoop--------------------Package Including4 * 230mAh HV 1S Lipo Battery 30C 3.

8v jst-ph 2.

More information about Crazepony


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings


Crazepony - If it doesn't work, but in different function. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Long range more than 2km range in the open area - Plug and play. Please avoid moving the receiver or the android phone or tablet while flying FPV, otherwise you might break the connection and cause your quad to crash!

Button contro l instead of switches to change channels. Insane for blade inductrix, Tiny Whoop, Nano QX etc. You could see some of the supported android phone models on the following product detailed description. Two switching buttons: easy to change frequency channels and bands. All in one vtx + camera + antenna, plug and play, ready to fly.

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings - 40 channels: 5 bands and all frequencies compatible, E, b, F, Cover A, r bands. Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc. Note 1. With 1. 25mm jst plug, perfect for Inductrix FC. The aio camera combo is perfect for ultra micro drone.

Speed: insane, 19000kv / 70000 rpm.

More information about Crazepony


Similar products



Anbee 2pcs FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain 5.8g Aerial Set RP-SMA male Plug


Anbee ANBEE-ATN-001 - Please connect them correctly. The aio camera combo is perfect for ultra micro drone. The accuracy is 2m, graphical interface, add auto sweep and match frequency, which is the highest accuracy of the chip in the world. With a high accuracy, aircraft, you can detect the quality of the antenna, this receiver is the mobile spectrum instrument, the factory's electromagnetic environment testing, the transmitter to do horizontal comparison, then the abstract radio, etc.

There are 2 same connecters on usb cable, the other is special for receiver. Please avoid moving the receiver or the android phone or tablet while flying FPV, otherwise you might break the connection and cause your quad to crash!40 channels: 5 bands and all frequencies compatible, Cover A, b, E, F, r bands.

Anbee 2pcs FPV 5.8Ghz Circular Polarized Clover Leaf Antenna High Gain 5.8g Aerial Set RP-SMA male Plug - Universal video transmitter and receiver for all, compatible with various kinds of remote control toys RC helicopter, quadcopter, airplane and boat etc. Note 1. Easy installation for racing drone, Only 3. 4g. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount works well with the 1.

More information about Anbee ANBEE-ATN-001


Similar products



Spotter V2 Micro FPV AIO Camera 5.8G with OSD Integrated Mic,FOV170 Degree 700TVL Video Transmitter 40ch 20MW~200MW Adjustable VTX for Mini FPV RC Drone by Crazepony


Crazepony - Frequency adjustment: Button press9. Frequency adjustment:Button press10 Built-in OSD11. Suitable for rc car/plane/boat--------------------package including1 * spotter V2 Micro FPV AIO Camera(Cloverleaf antenna) This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g.

Light weight:9g, suitable for indoor and outdoor fpv drone. All in one vtx + camera + antenna, plug and play, ready to fly. This receiver only suits for computer of windows version and Android phone that support UVC and ensure your phone can work with OTG connector. Shaft diameter: 08mm, motor length: 15mm, motor Diameter: 6mm, Cable Length: 56mm.

Spotter V2 Micro FPV AIO Camera 5.8G with OSD Integrated Mic,FOV170 Degree 700TVL Video Transmitter 40ch 20MW~200MW Adjustable VTX for Mini FPV RC Drone by Crazepony - Anbee circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma male connector for both receiver and transmitter, 2pcs Antennas in the Package. Precision manufactured and 100% Tested. New top rc hobby spotter, this is a micro 2 in 1 FPV camera and video transmitter.

More information about Crazepony


Similar products



Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX


Crazepony - Shaft diameter: 08mm, motor length: 15mm, motor Diameter: 6mm, Cable Length: 56mm. Anbee circularly Polarized for Reduced Interference. Runs on 5. 8 ghz commonly Use for FPV Systems. Clover-leaf style Antenna / Omni-Directional. Rp-sma male connector for both receiver and transmitter, 2pcs Antennas in the Package.

Precision manufactured and 100% Tested. New top rc hobby spotter, this is a micro 2 in 1 FPV camera and video transmitter. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. This receiver only suits for computer of windows version and Android phone that support UVC and ensure your phone can work with OTG connector.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX - Just remove the front, and reassemble. Power by 1S lipo battery. Speed: insane, 19000kv / 70000 rpm. Input charge connector: male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery. One side is special for mobile, please try to plug them in reverse. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

More information about Crazepony


Similar products



BETAFPV 10pcs Upgraded Tiny Whoop JST-PH 2.0 Power Whoop Female Connector Cable 55mm for Blade Inductrix


BETAFPV - Note 2. Light weight:9g, suitable for indoor and outdoor fpv drone. Power off memory: Replay the very last frequency band and channel. Easy installation for racing drone, Only 3. 4g. Must have for HV batteries and high performance. Suitable for battery of blade inductrix, nano CP X, mCP X, Nano QX 3D, Glimpse, Nano QX etc.

Upgrade jst-ph 2. 0 connector, aka powerWhoop connector, the pins will not loose easily. Cloverleaf antenna: better receive signal. Tiny whoop Blade inductrix future choice of battery. The video transmitter adjustable 20mw200mw, operate on 40 different channels and will work with most popular FPV goggles on the market such as FatShark googles.

BETAFPV 10pcs Upgraded Tiny Whoop JST-PH 2.0 Power Whoop Female Connector Cable 55mm for Blade Inductrix - If it doesn't work, but in different function. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. 40 channels: 5 bands and all frequencies compatible, F, b, Cover A, E, r bands. Universal video transmitter and receiver for all, quadcopter, compatible with various kinds of remote control toys RC helicopter, airplane and boat etc.

Note 1. Two switching buttons: easy to change frequency channels and bands.

More information about BETAFPV


Similar products