Top 7 Heatsink with Fan – Heatsinks

As an Amazon Associate I earn from qualifying purchases.

1. Easycargo


Easycargo 40mm Heatsink Fan 12V Kit, Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit 1

Easycargo #ad - Fan dimension: 40x40x10mm, wire connector 2-pin-2. 5mm, 12v dc, wire length: 5. 9"/15cm. Heatsink dimension: 40x40x11mm, Adhesive thermal pad dimension: 40x40x05mm. Each pack includes: 1pc 12v dc fan, 1pc thermal pad, 1pc heatsink, 1 metal grill, screw mouthing screw nut set.40mm fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc. Fan specifications: ball bearing, speed 6500rpm,, start up voltage: 7v dc, noise level: 28 dBA, airflow 7.93cfm, life time: 50000 hours, working voltage range: 108-13. 2v dc.
BrandEasycargo #ad
ManufacturerEasycargo #ad
Height0.98 Inches
Length1.57 Inches
Weight0.11 Pounds
Width1.57 Inches
Part Number4010-FH-12V-1pc



GPU Backplate Memory Radiator Aluminum Heatsink Cooler with Dual 70mm 4Pin PWM Cooling Fan for Graphics Card RTX 3090

PANO-MOUNTS #ad - Dual ball pwm: 2x70mm dual ball bearing high performance gpu cooler fan while others 50mm for better cool capacity but not noisy, with 4pin connector, long lasting, fan speed can be adjusted from 1500RPM-2800RPM according to inner working temperature automatically.

Upgraded elastic latch: With elastic latch, it is more flexible and sturdy, compared with others, very easy operation. Attention: it didn’t come with thermal pad, fan cable:50cm / 19. 69inch, fan size: 2x 70x70x15mm, fan speed:1500-2800rpm, you can add high power consumption thermal pad for better cool capacity. Lightweight & sturdy: the backplate memory cooler was designed with aviation aluminum 6061, sturdy and antioxidation.

1. 5mm thicknesswhile others 1mm, value choice between lightweight, larger area of dissipation for better cool capacity. Product size: 180x90x15mm 7. 09x3. 54x059inch, fan noise: 16-20dBA. Application: this elegant gpu backplate cooler was designed for RTX 3090, also can be compatible with RTX 3080 3070, just please make sure that the radiator will be installed on flat surface.
ManufacturerPANO-MOUNTS #ad
Height0.59 Inches
Length7.09 Inches
Width3.54 Inches
Part Number7015PWMGPU



ALAMSCN 3 Sets TEC1-12706 Semiconductor Refrigeration 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate + Aluminum Heatsink + 12V Cooling Fan

ALAMSCN #ad - Simple operation, cooling quickly, outstanding effect and good practicability. They can be used in small cooling applications such as insulated coolers, small wine cooler cabinets and to cool CPUs in computers.

The printed side of the tec device is the cold side. To check the tec module before assembling the kit without concerns about damaging the device, you can power it off a lower voltage power supply such as 5V, you will feel one side getting colder while the other side gets warmer. This is a simple thermoelectric cooling system kit that includes a TEC1-12706 Peltier Plate, a Aluminum Heatsink with thermal tape, a 12V Cooling Fan. Note: it is important to not fully power this device unless the hot side heat sink and fan are in place or damage to the device can quickly result.
BrandALAMSCN #ad
ManufacturerALAMSCN #ad
Height0.79 Inches
Length3.94 Inches
Weight0.04 Pounds
Width1.97 Inches
Part NumberAL12650

4. Easycargo


Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier 2, Easycargo 2-Pack 40mm Heatsink Fan 12V Kit

Easycargo #ad - 40mm fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc. Fan dimension: 4010 40x40x10mm, 12v dc, wire connector 2-pin-2. 5mm, wire length: 5. 9"/15cm. Heatsink dimension: 1. 6x1. 6x043 inch / 40x40x11mm, adhesive thermal pad dimension: 1. 6x1. 6x002 inch / 40mmx40mmx05mm. Fan specifications: ball bearing, noise level: 28 dba, life time: 50000 hours, speed 6500rpm, airflow 7.93cfm,, start up voltage: 7V DC, working voltage range: 10.8-13. 2v dc.
BrandEasycargo #ad
ManufacturerEasycargo #ad
Height0.87 Inches
Length1.57 Inches
Weight0.07 Pounds
Width1.57 Inches
Part NumberES-FH404011-12V

5. Intel


Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

Intel #ad - Compatibility Intel i3/i5/i7. Type heat Sink with Fan. Model e97379-003. Pin connector 4-pin Fan Connector.
BrandIntel #ad
ManufacturerIntel #ad
Height2.8 Inches
Length4.7 Inches
Weight0.4 Pounds
Width4.1 Inches
Part NumberE97379-003

6. NewHail


NewHail Replacement Heatsink Cooling Fan for DaHua DVR/HDCVI CPU Camera Fan DVR Motherboard Cooling Fan 5V with 2 Wire 2 Pin

NewHail #ad - All items are tested before shipping. Warranty: 6 Months warranty. Item: heatsink cooling fan Use for DVR HDCVI Camera with Screwdriver. Replacement and high quality. 5v 2wire 2pin Fan.
BrandNewHail #ad
ManufacturerNewHail #ad
Part NumberNHF-0007

7. BAY Direct


BAY Direct Heatsink Cooling Fan with Box for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin

BAY Direct #ad - Replacement and high quality. Item: heatsink Cooling fan for DaHua with box. 5v 2wire 2pin Fan. Warranty: 6 Months warranty. All items are tested before shipping.
BrandBAY Direct #ad
ManufacturerBAY Direct #ad
Weight0.11 Pounds
Part Number8541607873