As an Amazon Associate I earn from qualifying purchases.
1. Crazepony #ad
6pcs 350mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Micro FPV Racing Drone #adCrazepony #ad
- Newly developed chemistry hv 1s battery, longer flight time and safer charging situation. The battery connector is jst-ph 2. 0, blade nano qx, nano cpx, not work with stock Blade Inductrix, Blade mCX etc.
High capacity of 350mah 30c, small size of 6. 5 * 11. 5 * 71mm, is the great choice of Tiny Whoop. The weight of the 350mah 1s 30c 3.
8v hv lipo battery is approx 8. 5g/pcs, 08g heavier than the 300mAh battery. This tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops. Safer, higher quality and more powerful rate brings you higher speed flying experience.
2. Crazepony #ad
Gaoneng 350mAh 1S Lipo Battery HV 30C 3.8V with JST-PH 2.0 Connector for Tiny Whoop Micro FPV Racing Drone 6PCS #adCrazepony #ad
- As a fpv battery, don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into water. Don't throw it into fire. The weight of the 350mah 1s 30c 3. 8v hv lipo battery is approx 8.
6g/pcs, only 07g heavier than the 300mAh battery. The battery connector is jst-ph 2. 0, not work with stock blade Inductrix, nano cpx, Blade Nano QX, Blade mCX etc. Note: if the battery is puffed or DOA while receiving, our team will be here for you. High capacity of 350mah, small size of 70 * 10 * 5mm, is the great choice of Tiny Whoop.
3. Crazepony #ad
6pcs GAONENG 350mAh 1S Battery GNB27 Connector FPV Lipo Battery for Tiny Whoop 1S Brushless Whoop Drone #adCrazepony #ad
- 1. 0mm banana connector: 1. 0mm banana connector is more durable in terms of fit and conductivity than crimped pin. 9a continuous current: upgraded designed gnb27 connector aka 1. 0mm banana connector which can support 9A continuous current and 15A burst while the PH2.
0 connector is just support 4. 5a continuous current. With this 350mah 1s gnb27 battery, all 1S brushless drone will gain powerful and perform perfectly.
Highly recommend to use our newest GNB27 connector to get the best performance from this GNB27 350mAh 1s battery. Flight time: discharge curve is higher than PH2.
0 battery which means it can discharge more current in the same capacity and provide more power. Discharge rate: the discharge of the gnb27 350mah 1s lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag. Warranty: if there is any quality problem, we will stand by you.
4. Crazepony #ad
Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix #adCrazepony #ad
- Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x. Gaoneng 380mah battery is great for brushed whoop motors of any size and brushless 1s and 2s whoops as well.
Caution: as a fpv battery, don't over-charge, or over-discharge batteries. Don't throw it into water. Don't throw it into fire. Don't put it beside the high temperature condition.
High capacity of 380mah 60c, small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix. This 380mah hv 1s lipo battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit. The battery connector is ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX.
5. HHZ #ad
2 pcs 7.4V 950mAh 25C Lipo Battery with JST Connector for The Blade 200 QX and CX/CX2/CX3 WLtoys X520 RC Helicopter #adHHZ #ad
- For the blade 200 qx and cx/cx2/CX3 WLtoys X520 . Volt: 7. 4v2s, capacity :950Mah. With jst plug, 25C discharge. Battery size:70 x 25 x 13mm, Battery Weight:51 gram.
Customer service: if any technical support needed or question about our products. Please feel free to contact us, we will reply in 24 Hours.